Appearance

Create a wallet with celestia-node ​

This tutorial will go over using the cel-key utility to generate a wallet on celestia-node.

While this tutorial will go over installation process of cel-key, it is recommended that you complete the following prerequisites first:

Once you completed the prerequisite, you can proceed with this tutorial.

Using the cel-key utility ​

Inside the celestia-node repository is a utility called cel-key that uses the key utility provided by Cosmos-SDK under the hood. The utility can be used to add, delete, and manage keys for any DA node type (bridge || full || light), or just keys in general.

Installation ​

You need to first pull down the celestia-node repository:

sh
git clone https://github.com/celestiaorg/celestia-node.git
cd celestia-node/
git clone https://github.com/celestiaorg/celestia-node.git
cd celestia-node/

It can be built using either of the following commands:

sh
# dumps binary in current working directory, accessible via `./cel-key`
make cel-key
# dumps binary in current working directory, accessible via `./cel-key`
make cel-key

or

sh
# installs binary in GOBIN path, accessible via `cel-key`
make install-key
# installs binary in GOBIN path, accessible via `cel-key`
make install-key

For the purpose of this guide, we will use the make cel-key command.

Steps for generating node keys ​

To generate a key for a Celestia node, select the tab for your node type:

bash
./cel-key add <key-name> --keyring-backend test --node.type bridge --p2p.network <network>
./cel-key add <key-name> --keyring-backend test --node.type bridge --p2p.network <network>
bash
./cel-key add <key-name> --keyring-backend test --node.type full --p2p.network <network>
./cel-key add <key-name> --keyring-backend test --node.type full --p2p.network <network>
bash
./cel-key add <key-name> --keyring-backend test --node.type light --p2p.network <network>
./cel-key add <key-name> --keyring-backend test --node.type light --p2p.network <network>

This will load the key <key-name> into the directory of the node.

Further flags you can use to customize your key are the following:

  • --node.store: Specifies a different directory you can use to save your node data and configurations. Expects a path to a directory.
  • --p2p.network: Specifies which network you want the key for. Values are arabica and mocha. Please note the default network will be mocha.

Keep in mind that your celestia-node will only pick up keys that are inside the node.store directory under /keys so you should make sure to point cel-key utility to the correct directory via the node.store or p2p.network flags if you have specified a custom directory or network other than Mocha.

Also keep in mind that if you do not specify a network with --p2p.network, the default one will always be mocha.

Steps for exporting node keys ​

You can export a private key from the local keyring in encrypted and ASCII-armored format.

bash
./cel-key export <key-name> --keyring-backend test --node.type bridge --p2p.network <network>
./cel-key export <key-name> --keyring-backend test --node.type bridge --p2p.network <network>
bash
./cel-key export <key-name> --keyring-backend test --node.type full --p2p.network <network>
./cel-key export <key-name> --keyring-backend test --node.type full --p2p.network <network>
bash
./cel-key export <key-name> --keyring-backend test --node.type light --p2p.network <network>
./cel-key export <key-name> --keyring-backend test --node.type light --p2p.network <network>

Steps for importing node keys ​

To import from a mnemonic, use the following command, then enter your bip39 mnemonic:

bash
./cel-key add <key-name> --recover --keyring-backend test --node.type bridge --p2p.network <network>
./cel-key add <key-name> --recover --keyring-backend test --node.type bridge --p2p.network <network>
bash
./cel-key add <key-name> --recover --keyring-backend test --node.type full --p2p.network <network>
./cel-key add <key-name> --recover --keyring-backend test --node.type full --p2p.network <network>
bash
./cel-key add <key-name> --recover --keyring-backend test --node.type light --p2p.network <network>
./cel-key add <key-name> --recover --keyring-backend test --node.type light --p2p.network <network>

View all options for cel-key ​

sh
./cel-key --help
./cel-key --help

Docker and cel-key ​

Prerequisites ​

Running your node ​

Run the Docker image (in this example, we are using a light node):

bash
docker run --name celestia-node -e NODE_TYPE=light -e P2P_NETWORK=mocha -p 26659:26659 \
ghcr.io/celestiaorg/celestia-node:sha-747c9e5 celestia light start \
--core.ip rpc-mocha.pops.one --p2p.network mocha
docker run --name celestia-node -e NODE_TYPE=light -e P2P_NETWORK=mocha -p 26659:26659 \
ghcr.io/celestiaorg/celestia-node:sha-747c9e5 celestia light start \
--core.ip rpc-mocha.pops.one --p2p.network mocha

TIP

Refer to the ports section of the celestia-node troubleshooting page for information on which ports are required to be open on your machine.

List active containers in another window with:

bash
docker ps
docker ps

The response will look like:

bash
CONTAINER ID   IMAGE           COMMAND                  CREATED          STATUS          PORTS      NAMES
<container_id>   celestia-node   "/entrypoint.sh cele…"   22 seconds ago   Up 21 seconds   2121/tcp   docker-compose-test-celestia-1
CONTAINER ID   IMAGE           COMMAND                  CREATED          STATUS          PORTS      NAMES
<container_id>   celestia-node   "/entrypoint.sh cele…"   22 seconds ago   Up 21 seconds   2121/tcp   docker-compose-test-celestia-1

Interact with the container by replacing <container_id> for the container ID:

bash
docker exec -ti <container_id> /bin/bash
docker exec -ti <container_id> /bin/bash

Now, interact with cel-key to check for the key that was autogenerated when you started the node:

bash
./cel-key list --keyring-backend test --node.type light
./cel-key list --keyring-backend test --node.type light

You can also export your key from the container. In the next section, you'll learn how to mount existing keys to the container.

Mounting existing keys to container ​

In this example, we'll be mounting an existing key to the container. We're also using an existing image called celestia-node. This will mount the entire /.celestia-light-<p2p_network>/keys directory to your image.

Write a docker-compose.yml to accomplish this:

yaml
version: "3.8"
services:
  celestia:
    image: celestia-node
    environment:
      - NODE_TYPE=light
    command: celestia light start --core.ip rpc-mocha.pops.one --p2p.network mocha --keyring.accname my_celes_key
    volumes:
      - ${PWD}/keys:/root/.celestia-light-mocha-4/keys
    ports:
      - 26659:26659
version: "3.8"
services:
  celestia:
    image: celestia-node
    environment:
      - NODE_TYPE=light
    command: celestia light start --core.ip rpc-mocha.pops.one --p2p.network mocha --keyring.accname my_celes_key
    volumes:
      - ${PWD}/keys:/root/.celestia-light-mocha-4/keys
    ports:
      - 26659:26659

Start the container by running the following command in the directory with your docker-compose.yml:

bash
docker-compose up
docker-compose up

List active containers in another window with:

bash
docker ps
docker ps

The response will look like:

bash
CONTAINER ID   IMAGE           COMMAND                  CREATED          STATUS          PORTS      NAMES
<container_id>   celestia-node   "/entrypoint.sh cele…"   22 seconds ago   Up 21 seconds   2121/tcp   docker-compose-test-celestia-1
CONTAINER ID   IMAGE           COMMAND                  CREATED          STATUS          PORTS      NAMES
<container_id>   celestia-node   "/entrypoint.sh cele…"   22 seconds ago   Up 21 seconds   2121/tcp   docker-compose-test-celestia-1

Interact with the container by replacing <container_id> for the container ID:

bash
docker exec -ti <container_id> /bin/bash
docker exec -ti <container_id> /bin/bash

Now, interact with cel-key to check your address matches the address you expect with the key you mounted:

bash
root@<container_id>:/# ./cel-key list --keyring-backend test --node.type light
using directory:  ~/.celestia-light-mocha-4/keys
- address: celestia1wkhyhr7ngf0ayqlpnsnxg4d72hfs5453dvunm9
  name: my_celes_key
  pubkey: '{"@type":"/cosmos.crypto.secp256k1.PubKey","key":"A1/NsoY0RGL7Hqt4VWLg441GQKJsZ2fBUnZXipgns8oV"}'
  type: local
root@<container_id>:/# ./cel-key list --keyring-backend test --node.type light
using directory:  ~/.celestia-light-mocha-4/keys
- address: celestia1wkhyhr7ngf0ayqlpnsnxg4d72hfs5453dvunm9
  name: my_celes_key
  pubkey: '{"@type":"/cosmos.crypto.secp256k1.PubKey","key":"A1/NsoY0RGL7Hqt4VWLg441GQKJsZ2fBUnZXipgns8oV"}'
  type: local