Appearance

Setting up a Celestia validator node ​

This tutorial will guide you through setting up a validator node on Celestia. Validator nodes allow you to participate in consensus in the Celestia network.

validator node

Hardware requirements ​

The following hardware minimum requirements are recommended for running a validator node:

  • Memory: 16 GB RAM
  • CPU: 8 cores
  • Disk: 2 TB SSD Storage
  • Bandwidth: 1 Gbps for Download/1 Gbps for Upload

Setting up a validator node ​

The following tutorial is done on an Ubuntu Linux 20.04 (LTS) x64 instance machine.

First, follow the instructions on setting up a consensus node.

Wallet ​

Follow the tutorial on creating a wallet.

Delegate stake to a validator ​

Create an environment variable for the address:

bash
VALIDATOR_WALLET=<validator-wallet-name>
VALIDATOR_WALLET=<validator-wallet-name>

If you want to delegate more stake to any validator, including your own you will need the celesvaloper address of the validator in question. You can run the command below to get the celesvaloper of your local validator wallet in case you want to delegate more to it:

bash
celestia-appd keys show $VALIDATOR_WALLET --bech val -a
celestia-appd keys show $VALIDATOR_WALLET --bech val -a

After entering the wallet passphrase you should see a similar output:

bash
Enter keyring passphrase:
celesvaloper1q3v5cugc8cdpud87u4zwy0a74uxkk6u43cv6hd
Enter keyring passphrase:
celesvaloper1q3v5cugc8cdpud87u4zwy0a74uxkk6u43cv6hd

To delegate tokens to the celestiavaloper validator, as an example you can run:

bash
celestia-appd tx staking delegate \
celestiavaloper1q3v5cugc8cdpud87u4zwy0a74uxkk6u4q4gx4p 1000000utia \
--from=$VALIDATOR_WALLET --chain-id=mocha-4 \
--fees=21000utia
celestia-appd tx staking delegate \
celestiavaloper1q3v5cugc8cdpud87u4zwy0a74uxkk6u4q4gx4p 1000000utia \
--from=$VALIDATOR_WALLET --chain-id=mocha-4 \
--fees=21000utia

If successful, you should see a similar output as:

console
code: 0
codespace: ""
data: ""
gas_used: "0"
gas_wanted: "0"
height: "0"
info: ""
logs: []
raw_log: '[]'
timestamp: ""
tx: null
txhash: <tx-hash>
code: 0
codespace: ""
data: ""
gas_used: "0"
gas_wanted: "0"
height: "0"
info: ""
logs: []
raw_log: '[]'
timestamp: ""
tx: null
txhash: <tx-hash>

You can check if the TX hash went through using the block explorer by inputting the txhash ID that was returned.

Optional: Deploy the celestia-node ​

Running a bridge node is critical to the Celestia network as it enables the data availability and consensus nodes to communicate with one another. It is recommended to support the data availability network, but is not required for celestia-app.

If you are not running a bridge node, you can skip to run a validator node.

This section describes part 2 of Celestia validator node setup: running a Celestia bridge node daemon.

Install celestia-node ​

You can follow the tutorial for installing celestia-node

Initialize the bridge node ​

Run the following:

bash
celestia bridge init --core.ip <URI>
celestia bridge init --core.ip <URI>

TIP

Refer to the ports section of the celestia-node troubleshooting page for information on which ports are required to be open on your machine.

If you need a list of RPC endpoints to connect to, you can find the list on the Mocha testnet page or list on the Arabica devnet page.

Run the bridge node ​

Run the following:

bash
celestia bridge start
celestia bridge start

Optional: start the bridge node with SystemD ​

Follow the tutorial on setting up the bridge node as a background process with SystemD.

You have successfully set up a bridge node that is syncing with the network.

Run the validator node ​

If you are running celestia-app v1.x.x:

sh
celestia-appd start
celestia-appd start

If you are running celestia-app >= v2.0.0: then you'll want to start the node with a --v2-upgrade-height that is dependent on the network. The --v2-upgrade-height flag is only needed during the v2 upgrade height so after your node has executed the upgrade (e.g. you see the log upgraded from app version 1 to 2), you don't need to provide this flag for future celestia-appd start invocations.

sh
celestia-appd start --v2-upgrade-height <height>
celestia-appd start --v2-upgrade-height <height>
sh
celestia-appd start --v2-upgrade-height 2585031
celestia-appd start --v2-upgrade-height 2585031
sh
celestia-appd start --v2-upgrade-height 1751707
celestia-appd start --v2-upgrade-height 1751707

After completing all the necessary steps, you are now ready to run a validator! In order to create your validator onchain, follow the instructions below. Keep in mind that these steps are necessary ONLY if you want to participate in the consensus.

Pick a moniker name of your choice! This is the validator name that will show up on public dashboards and explorers. VALIDATOR_WALLET must be the same you defined previously. Parameter --min-self-delegation=1000000 defines the amount of tokens that are self delegated from your validator wallet.

Now, connect to the network of your choice.

You have the following option of connecting to list of networks shown below:

Continuing the validator tutorial, here are the steps to connect your validator to Mocha:

bash
MONIKER="your_moniker"
VALIDATOR_WALLET="validator"

celestia-appd tx staking create-validator \
    --amount=1000000utia \
    --pubkey=$(celestia-appd tendermint show-validator) \
    --moniker=$MONIKER \
    --chain-id=mocha-4 \
    --commission-rate=0.1 \
    --commission-max-rate=0.2 \
    --commission-max-change-rate=0.01 \
    --min-self-delegation=1000000 \
    --from=$VALIDATOR_WALLET \
    --keyring-backend=test \
    --fees=21000utia \
    --gas=220000
MONIKER="your_moniker"
VALIDATOR_WALLET="validator"

celestia-appd tx staking create-validator \
    --amount=1000000utia \
    --pubkey=$(celestia-appd tendermint show-validator) \
    --moniker=$MONIKER \
    --chain-id=mocha-4 \
    --commission-rate=0.1 \
    --commission-max-rate=0.2 \
    --commission-max-change-rate=0.01 \
    --min-self-delegation=1000000 \
    --from=$VALIDATOR_WALLET \
    --keyring-backend=test \
    --fees=21000utia \
    --gas=220000

You will be prompted to confirm the transaction:

console
confirm transaction before signing and broadcasting [y/N]: y
confirm transaction before signing and broadcasting [y/N]: y

Inputting y should provide an output similar to:

console
code: 0
codespace: ""
data: ""
gas_used: "0"
gas_wanted: "0"
height: "0"
info: ""
logs: []
raw_log: '[]'
timestamp: ""
tx: null
txhash: <tx-hash>
code: 0
codespace: ""
data: ""
gas_used: "0"
gas_wanted: "0"
height: "0"
info: ""
logs: []
raw_log: '[]'
timestamp: ""
tx: null
txhash: <tx-hash>

You should now be able to see your validator from a block explorer

Submit your validator information ​

After starting your node, please submit your node as a seed and peer to the networks repository.

Optional: Transaction indexer configuration options ​

Follow the instructions under transaction indexer configuration options to configure your config.toml file to select which transactions to index.

Additional resources ​

For additional resources, refer to the extra resources for consensus nodessection of the consensus node page.

FAQ ​

+2/3 committed an invalid block: wrong Block.Header.Version ​

If you encounter an error like:

bash
2024-04-25 14:48:24 6:48PM ERR CONSENSUS FAILURE!!! err="+2/3 committed an invalid block: wrong Block.Header.Version. Expected {11 1}, got {11 2}" module=consensus stack="goroutine 214 [running]:\nruntime/debug.Stack()\n\t/usr/local/go/src/runtime/debug/stack.go:24 +0x64\ngithub.com/tendermint/tendermint/consensus.(*State).receiveRoutine.func2()\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:746 +0x44\npanic({0x1b91180?, 0x400153b240?})\n\t/usr/local/go/src/runtime/panic.go:770 +0x124\ngithub.com/tendermint/tendermint/consensus.(*State).finalizeCommit(0x400065ea88, 0x3)\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:1637 +0xd30\ngithub.com/tendermint/tendermint/consensus.(*State).tryFinalizeCommit(0x400065ea88, 0x3)\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:1606 +0x26c\ngithub.com/tendermint/tendermint/consensus.(*State).handleCompleteProposal(0x400065ea88, 0x3)\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:2001 +0x2d8\ngithub.com/tendermint/tendermint/consensus.(*State).handleMsg(0x400065ea88, {{0x2b30a00, 0x400143e048}, {0x40002a61b0, 0x28}})\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:856 +0x1c8\ngithub.com/tendermint/tendermint/consensus.(*State).receiveRoutine(0x400065ea88, 0x0)\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:782 +0x2c4\ncreated by github.com/tendermint/tendermint/consensus.(*State).OnStart in goroutine 169\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:391 +0x110\n"
2024-04-25 14:48:24 6:48PM ERR CONSENSUS FAILURE!!! err="+2/3 committed an invalid block: wrong Block.Header.Version. Expected {11 1}, got {11 2}" module=consensus stack="goroutine 214 [running]:\nruntime/debug.Stack()\n\t/usr/local/go/src/runtime/debug/stack.go:24 +0x64\ngithub.com/tendermint/tendermint/consensus.(*State).receiveRoutine.func2()\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:746 +0x44\npanic({0x1b91180?, 0x400153b240?})\n\t/usr/local/go/src/runtime/panic.go:770 +0x124\ngithub.com/tendermint/tendermint/consensus.(*State).finalizeCommit(0x400065ea88, 0x3)\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:1637 +0xd30\ngithub.com/tendermint/tendermint/consensus.(*State).tryFinalizeCommit(0x400065ea88, 0x3)\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:1606 +0x26c\ngithub.com/tendermint/tendermint/consensus.(*State).handleCompleteProposal(0x400065ea88, 0x3)\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:2001 +0x2d8\ngithub.com/tendermint/tendermint/consensus.(*State).handleMsg(0x400065ea88, {{0x2b30a00, 0x400143e048}, {0x40002a61b0, 0x28}})\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:856 +0x1c8\ngithub.com/tendermint/tendermint/consensus.(*State).receiveRoutine(0x400065ea88, 0x0)\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:782 +0x2c4\ncreated by github.com/tendermint/tendermint/consensus.(*State).OnStart in goroutine 169\n\t/go/pkg/mod/github.com/celestiaorg/celestia-core@v1.35.0-tm-v0.34.29/consensus/state.go:391 +0x110\n"

then it is likely that the network has upgraded to a new app version but your consensus node was not prepared for the upgrade. To fix this, you'll need to update your binary to the latest version and restart your node with the relevant --v2-upgrade-height for the network you're running on. If your node still can't sync to the tip of the chain after the above steps, consider a celestia-appd tendermint unsafe-reset-all to reset your node and start syncing from the genesis block.